deploy.

App/wwwroot/HiAPI-docsite/api/Hi.NcParsers.LogicSyntaxs.G43p4RtcpSyntax.html

@@ -353,6 +353,36 @@ flag (no parameter object to hang an H on):
     }
   ]
 }</code></pre>
+The first block after a program end — <code>#Previous:</code> carries the
+<code>ProgramEnd</code> section next to the still-active G43.4, and the
+block itself swings a rotary axis (as a post-M02 <code>G0 A90.</code> does
+when a CAM file chains several programs). This is the reset edge
+(<a class="xref" href="Hi.NcParsers.LogicSyntaxs.ProgramEndSyntax.html">ProgramEndSyntax</a>): the controller's reset cancels
+tool-center-point control, so the modal is <b>not</b> carried, no
+<code>Dynamic</code> entry is written (the swing stays a plain McLinear
+rotary move instead of pinning the tool tip), and the block gets the
+G49 sentinel with the identity Mat4d — <a class="xref" href="Hi.NcParsers.LogicSyntaxs.ToolHeightOffsetSyntax.html">ToolHeightOffsetSyntax</a>
+skipped this block because the previous term was not ISO:
+#Previous:
+<pre><code class="lang-csharp">{
+  "ProgramEnd": { "Term": "M02" },
+  "MachineCoordinateState": { "X": 0, "Y": 0, "Z": 0, "A": 0, "B": 0 },
+  "ToolHeightCompensation": { "Offset_mm": 10, "Term": "G43.4", "OffsetId": 1 }
+}</code></pre>
+#BeforeBuild:
+<pre><code class="lang-csharp">{ "MachineCoordinateState": { "A": 90, "B": 0 } }</code></pre>
+#AfterBuild:
+<pre><code class="lang-csharp">{
+  "MachineCoordinateState": { "A": 90, "B": 0 },
+  "ToolHeightCompensation": { "Offset_mm": 0, "Term": "G49", "OffsetId": 0 },
+  "ProgramToMcTransform": [
+    {
+      "Source": "ToolHeightCompensation",
+      "Kind": "Static",
+      "Mat4d": [1,0,0,0, 0,1,0,0, 0,0,1,0, 0,0,0,1]
+    }
+  ]
+}</code></pre>