deploy.

App/wwwroot/HiAPI-docsite/anatomy/tool-house/holder/freeform-holder-panel.html

@@ -88,7 +88,7 @@
           <h1 id="freeform-holder-panel">Freeform Holder Panel</h1>
 
 <p>The key model is <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html">FreeformHolder</a>: a holder whose shape comes from a referenced geometry, typically an STL, positioned by two anchor transformers — one to the spindle, one to the cutter.</p>
-<p>On the web client the holder occupies four child sections of the Holder node under the selected tool — Geometry, Geom To Spindle, Geom To Cutter and Resolution, the nodes whose role paths end in <code>.../holder/geometry</code>, <code>.../holder/geom-to-spindle</code>, <code>.../holder/geom-to-cutter</code> and <code>.../holder/resolution</code>, reached at <code>/tool-house/:toolId/holder/:subtab</code>. Its Name, readonly Abstract Note and Note are edited one level up, on the <a class="xref" href="holder-panel.html">Holder Panel</a> itself, under the Metadata-on-container convention. Every field ships on both clients; what differs is the surface hosting them — the WPF client gives the same fields a tab strip of its own.</p>
+<p>The holder occupies four child sections of the Holder node under the selected tool — Geometry, Geom To Spindle, Geom To Cutter and Resolution, the nodes whose role paths end in <code>.../holder/geometry</code>, <code>.../holder/geom-to-spindle</code>, <code>.../holder/geom-to-cutter</code> and <code>.../holder/resolution</code>, reached at <code>/tool-house/:toolId/holder/:subtab</code>. Its Name, readonly Abstract Note and Note are edited one level up, on the <a class="xref" href="holder-panel.html">Holder Panel</a> itself, under the Metadata-on-container convention.</p>
 <p>The three shape sections are not holder-specific editors. They are the same generic Geometry and Transformer slots the <a class="xref" href="../../general-setup/fixture.html">Fixture</a> branch of the General Setup page is built from: a kind picker on the section node, and the chosen kind's own editor on the child node below it. So an STL holder is picked as <code>StlFile</code> and its source file set through the shared StlFile editor, a <code>TransformationGeom</code> holder grows Inner Geometry and Inner Transformer nodes, a <code>GeomCombination</code> holder grows one node per item, and each placement grows the chosen transformer kind's editor — Static Translation for the usual <code>(0, 0, h)</code> offset.</p>
 <h2 id="layout">Layout</h2>
 <h3 id="web-layout">Web Layout</h3>
@@ -118,52 +118,13 @@
 </ul>
 </li>
 </ul>
-<h3 id="wpf-layout">WPF Layout</h3>
-<ul>
-<li>Freeform Holder Panel
-<ul>
-<li>Head Line
-<ul>
-<li>Title Label</li>
-</ul>
-</li>
-<li>Tabs
-<ul>
-<li>Geometry Tab
-<ul>
-<li><a class="xref" href="../../geom/geom-manage-control.html">Geometry Management Panel</a></li>
-</ul>
-</li>
-<li>Anchor Tab
-(Apply  <a class="xref" href="../../geom/transformer-panel.html">Transformer Manage Panel</a> to set the following tabs)
-<ul>
-<li>Geom To Spindle Tab</li>
-<li>Geom To Cutter Tab</li>
-</ul>
-</li>
-<li>Resolution Tab
-Model: <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html#Hi_NcMech_Holders_FreeformHolder_PolarResolution2d">PolarResolution2d</a>
-<a class="xref" href="../../widget/polar-resolution-2d-panel.html">Polar Resolution 2d</a></li>
-<li>Info Tab
-<ul>
-<li>Name TextField (editable)</li>
-<li>AbstractNote TextField (readonly)</li>
-<li>Note TextField (editable)</li>
-</ul>
-</li>
-</ul>
-</li>
-</ul>
-</li>
-</ul>
-<p>Remember to call <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html#Hi_NcMech_Holders_FreeformHolder_UpdateByGeom">UpdateByGeom()</a> after geometry reference or content changed.</p>
 <h2 id="feature">Feature</h2>
 <p>The generic editors reach the holder's own members, and that is what makes the split work. When the Holder node's children are built, the page calls <code>FreeformHolderController</code>'s <code>Get</code> with its session key; the server publishes the holder's <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html#Hi_NcMech_Holders_FreeformHolder_Geom">Geom</a>, <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html#Hi_NcMech_Holders_FreeformHolder_GeomToSpindleTransformer">GeomToSpindleTransformer</a> and <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html#Hi_NcMech_Holders_FreeformHolder_GeomToCutterTransformer">GeomToCutterTransformer</a> in the index service under three per-session keys (<code>-HolderGeom</code>, <code>-HolderGeomToSpindle</code>, <code>-HolderGeomToCutter</code>) and hands the keys back. The keys name the very objects the holder holds, so an edit through a kind editor lands on the holder directly. The keys are returned even when a member is empty — nothing is published then, the section's picker reads an empty slot, and picking a kind fills that same key — which is how a freshly switched-to Freeform holder, whose geometry starts empty, gets its first shape.</p>
 <p>Picking a kind is a container-aware create, not a bare <code>New</code>. The Geometry picker calls <code>CreateGeometry</code>, which builds the geometry, sets it as the holder's <code>Geom</code> and publishes it under the section's key (None clears the geometry). A placement picker first creates the transformer through the kind's own <code>New</code> endpoint and then attaches it with <code>UpdateGeomToSpindleTransformer</code> or <code>UpdateGeomToCutterTransformer</code>. Without the attach, only the index-service entry would change and the holder would keep pointing at its old transformer.</p>
 <p>Because the generic editors hold no reference back to the holder, every edit at or below a section ends in the holder resync the page wires onto the section: a geometry edit calls <code>UpdateGeometryContent</code>, a placement edit re-attaches the transformer under its key. Both run <code>UpdateByGeom()</code> to regenerate the solid, <code>ClearCache()</code>, and <code>AlignAnchorByExposedCutterHeight()</code> to re-place the cutter under the holder — clearing the cache alone would leave the cutter where it was. The page then refreshes the tool list and the canvas.</p>
 <p>The Resolution section writes the polar resolution straight onto the holder: <code>SetPolarResolution</code> assigns a fresh <a class="xref" href="../../../api/Hi.Geom.Resolution.PolarResolution2d.html">PolarResolution2d</a> and the holder swaps its solid for one born with the new value, keeping the geometry. <code>Get</code> also returns the current pair, which is how the two fields are seeded.</p>
 <p>Guards sit on both sides. Every action on the controller answers Not Found for an unknown tool id and Bad Request when the tool's holder is not a <code>FreeformHolder</code>; <code>SetPolarResolution</code> rejects a linear or angle value that is not greater than zero, and the Resolution section refuses to send one. Fields commit on blur or Enter.</p>
-<p>Switching a tool to Freeform is a committing choice. <code>SetHolderType</code> assigns a new <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html">FreeformHolder</a> only when the tool does not already carry one, so a holder authored on the WPF client or through HiNcRcl survives a round trip through the web page with its geometry, anchors and resolution intact.</p>
+<p>Switching a tool to Freeform is a committing choice. <code>SetHolderType</code> assigns a new <a class="xref" href="../../../api/Hi.NcMech.Holders.FreeformHolder.html">FreeformHolder</a> only when the tool does not already carry one, so a holder authored elsewhere — through HiNcRcl, say — survives a round trip through this page with its geometry, anchors and resolution intact.</p>
 <h2 id="source-code-path">Source Code Path</h2>
 <p>See <a class="xref" href="../../index.html">HiNC App Anatomy</a> for git repository links.</p>
 <p>HiNC-2025-webservice (Quasar CLI SPA):</p>