deploy.

2026-09-12 18:16:27 +08:00
parent b7f55aa631
commit 397a7a8cc4
96 changed files with 1167 additions and 1259 deletions
@@ -138,6 +138,10 @@ they are the fastest way to find out what a run actually did.</p>
 <td>a G41/G42 block whose compensated path runs against the programmed direction (an inner arc or groove smaller than the offset radius); a real control stops there with an interference alarm (Fanuc PS0041) while the simulation continues on the swapped-side path — on a tool-centre CAM path the radius offset row (D row) must hold the wear only, not the tool radius</td>
 </tr>
 <tr>
+<td><code>RadiusComp--PlaneChangeInRegion</code></td>
+<td>a G17/G18/G19 that selects a different plane while G41/G42 is still active (a G40 sharing its block with a plane code included); a real control stops there (Fanuc PS0037 CAN NOT CHANGE PLANE IN CRC) because the corner spanning the change is built from one running axis per plane — cancel with G40 before selecting the new plane</td>
+</tr>
+<tr>
 <td><code>Coord-WorkOffset--AdditionalZero</code></td>
 <td>a Fanuc-family additional work coordinate system (<code>G54.1 Pn</code>, also written <code>G54 Pn</code>) was selected but no offset has been entered for it; the program runs on the machine origin</td>
 </tr>