deploy webservice static-file routing for docsite folder URLs, per-instance step-cache db, and constant-height panel title bars.

App/wwwroot/HiAPI-docsite/api/Hi.Milling.FluteContours.html

@@ -110,8 +110,16 @@ Classes
 </dd>
     </dl>
     <dl class="jumplist">
-      <dt><a class="xref" href="Hi.Milling.FluteContours.FreeContourTray.html">FreeContourTray</a></dt>
-      <dd><p>Represents a container for multiple flute contours with free arrangement.</p>
+      <dt><a class="xref" href="Hi.Milling.FluteContours.FreeFluting.html">FreeFluting</a></dt>
+      <dd><p>A milling cutter's fluting in which every flute is defined individually —
+each flute carries its own contour, so spacing, helix and rake need not
+repeat. Use <a class="xref" href="Hi.Milling.FluteContours.UniformFluting.html">UniformFluting</a> when one baseline contour repeated
+evenly around the cutter is enough.</p>
+</dd>
+    </dl>
+    <dl class="jumplist">
+      <dt><a class="xref" href="Hi.Milling.FluteContours.FreeformBottomContour.html">FreeformBottomContour</a></dt>
+      <dd><p>Represents a freeform bottom contour for milling tools, allowing arbitrary contour shapes.</p>
 </dd>
     </dl>
     <dl class="jumplist">
@@ -141,8 +149,11 @@ This class wraps another working contour and applies an angular transformation t
 </dd>
     </dl>
     <dl class="jumplist">
-      <dt><a class="xref" href="Hi.Milling.FluteContours.UniformContourTray.html">UniformContourTray</a></dt>
-      <dd><p>Represents a uniform contour tray for milling tool flutes.</p>
+      <dt><a class="xref" href="Hi.Milling.FluteContours.UniformFluting.html">UniformFluting</a></dt>
+      <dd><p>A milling cutter's fluting built from one shared baseline contour repeated
+evenly around the cutter: every flute has the same geometry, spaced at equal
+angles. Use <a class="xref" href="Hi.Milling.FluteContours.FreeFluting.html">FreeFluting</a> when the flutes need to be defined
+individually.</p>
 </dd>
     </dl>
     <h3 id="interfaces">
@@ -154,13 +165,19 @@ Interfaces
 </dd>
     </dl>
     <dl class="jumplist">
-      <dt><a class="xref" href="Hi.Milling.FluteContours.IContourTray.html">IContourTray</a></dt>
-      <dd><p>Interface for a container that holds multiple flute contours.</p>
+      <dt><a class="xref" href="Hi.Milling.FluteContours.IFluteNumSourceProperty.html">IFluteNumSourceProperty</a></dt>
+      <dd><p>Interface that requiring a FluteNumSource property.</p>
 </dd>
     </dl>
     <dl class="jumplist">
-      <dt><a class="xref" href="Hi.Milling.FluteContours.IFluteNumSourceProperty.html">IFluteNumSourceProperty</a></dt>
-      <dd><p>Interface that requiring a FluteNumSource property.</p>
+      <dt><a class="xref" href="Hi.Milling.FluteContours.IFluting.html">IFluting</a></dt>
+      <dd><p>A milling cutter's fluting: the complete set of flute contours that do the
+cutting. Either one shared baseline repeated evenly around the cutter
+(<a class="xref" href="Hi.Milling.FluteContours.UniformFluting.html">UniformFluting</a>) or one individually defined contour per flute
+(<a class="xref" href="Hi.Milling.FluteContours.FreeFluting.html">FreeFluting</a>) — every flute is definable on its own.
+&ldquo;Fluting&rdquo; is the machining noun for a cutter's flute geometry and carries no
+size of its own, so it describes the flute set of a 4 mm end mill exactly as
+well as that of a large face mill.</p>
 </dd>
     </dl>
     <dl class="jumplist">