tune

demo.hincproj

@@ -5,6 +5,44 @@
       <SolidMachiningChainSource>
         <XmlSource>PmcB1s\PMC_B1.mt</XmlSource>
       </SolidMachiningChainSource>
+      <MillingTool>
+        <Note>T1</Note>
+        <HolderSource>
+          <XmlSource>D10H10.holder</XmlSource>
+        </HolderSource>
+        <CutterSource>
+          <AptCutter>
+            <AptGetter>
+              <BullNoseApt>
+                <D>12</D>
+                <R0>0.5</R0>
+                <FluteH>40</FluteH>
+                <FullH>40</FullH>
+              </BullNoseApt>
+            </AptGetter>
+            <Sculp>
+              <ConstHelixSculp>
+                <FluteNum>3</FluteNum>
+                <Helix_deg>50</Helix_deg>
+                <RadialRakeAngle_deg>15</RadialRakeAngle_deg>
+                <MillingParaXmlSource>
+                  <XmlSource>MillingParaGrids\Al6061T6_201902.mp.xml</XmlSource>
+                </MillingParaXmlSource>
+              </ConstHelixSculp>
+            </Sculp>
+            <LatitudeNum>6</LatitudeNum>
+            <!--LongitudeNum should be the multiple of 4.-->
+            <LongitudeNum>24</LongitudeNum>
+            <CutterHeatCondition>
+              <CutterHeatTransferCoefficient_WdmK>58</CutterHeatTransferCoefficient_WdmK>
+              <CutterHeatCapacity_JdgK>0.24</CutterHeatCapacity_JdgK>
+              <CutterDensity_gdcm3>15.63</CutterDensity_gdcm3>
+              <CutterMass_g>7</CutterMass_g>
+              <CutterDermis_mm>0.1</CutterDermis_mm>
+            </CutterHeatCondition>
+          </AptCutter>
+        </CutterSource>
+      </MillingTool>
       <FixtureSource>
         <Fixture>
           <Solid>
@@ -19,7 +57,7 @@
         </Fixture>
       </FixtureSource>
       <Workpiece>
-        <Resolution>0.1</Resolution>
+        <Resolution>0.5</Resolution>
         <RawGeom>
           <Box3d>
             <Min>(2, 0, -50)</Min>
@@ -41,7 +79,7 @@
               <StaticTranslation Trans="(2, 0, -50)" />
             </Transformer>
             <Geom>
-              <StlFile>standard_force_4exp_201902_design.stl</StlFile>
+              <StlFile>Design\standard_force_4exp_201902_design.stl</StlFile>
             </Geom>
           </TransformationGeom>
         </IdealGeom>
@@ -92,9 +130,9 @@
                   </MillingParaXmlSource>
                 </ConstHelixSculp>
               </Sculp>
-              <LatitudeNum>90</LatitudeNum>
+              <LatitudeNum>6</LatitudeNum>
               <!--LongitudeNum should be the multiple of 4.-->
-              <LongitudeNum>360</LongitudeNum>
+              <LongitudeNum>24</LongitudeNum>
               <CutterHeatCondition>
                 <CutterHeatTransferCoefficient_WdmK>58</CutterHeatTransferCoefficient_WdmK>
                 <CutterHeatCapacity_JdgK>0.24</CutterHeatCapacity_JdgK>