HiNC-Deploy/Demo-Para-Training-S50C-202501
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

data: record the dt-side S50C training state

Browse Source 
Seven new .mp fits from the fine/test sweeps (0.0001 .. 0.3), the S50C
workpiece material and CuttingParameter side-files they reference, the
schema-migrated S50C.hincproj, and the test-err-ratio project. These were
produced by runs on HiNC-1 and existed only in dt's working tree.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
iamboss
2026-08-07 15:21:34 +08:00
co-authored by Claude Opus 5
parent c79894de58
commit fe55e87597
16 changed files with 1069 additions and 97 deletions
Download Patch File Download Diff File Expand all files Collapse all files
BT40-ER16-090.Holder
+7 -1
View File
@@ -2,7 +2,7 @@
<CylindroidHolder> <CylindroidHolder>
<Name>default</Name> <Name>default</Name>
<Note>BT40-ER16-090</Note> <Note>BT40-ER16-090</Note>
<Cylindroid LongitudeNum="24"> <Cylindroid>
<PairZr>(0,25)</PairZr> <PairZr>(0,25)</PairZr>
<PairZr>(36.5,25)</PairZr> <PairZr>(36.5,25)</PairZr>
<PairZr>(36.5,44.5)</PairZr> <PairZr>(36.5,44.5)</PairZr>
@@ -10,4 +10,10 @@
<PairZr>(106.6,40)</PairZr> <PairZr>(106.6,40)</PairZr>
<PairZr>(136.44,40)</PairZr> <PairZr>(136.44,40)</PairZr>
</Cylindroid> </Cylindroid>
<PolarResolution2d>
<PolarResolution2d>
<LinearResolution_mm>0.5</LinearResolution_mm>
<AngleResolution_deg>5</AngleResolution_deg>
</PolarResolution2d>
</PolarResolution2d>
</CylindroidHolder> </CylindroidHolder>
CuttingParameter/S50C.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C</Name>
<Note>S50C-fine-outlier-0.2. Built on 2025-01-17.</Note>
<Kse>781.9193047583416</Kse>
<Ksc>534.2515063930691</Ksc>
<Ksn>-1341.4299667097694</Ksn>
<Kpe>12.488024348568263</Kpe>
<Kpc>19.81313632613896</Kpc>
<Kpn>-20.852754261520523</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-2-fine-0.3.mp
+10
View File
@@ -0,0 +1,10 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara2d>
<Name>S50C-2-fine-0.3.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 55.68%; FilteredSampleNum = 634500</Note>
<Ksc>835.9393964937811</Ksc>
<Ksn>-1715.130695335738</Ksn>
<Kpc>2.6644883557656196</Kpc>
<Kpn>25.33143525147404</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara2d>
Output/S50C-3-fine-0.01.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C-3-fine-0.01.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 95.60%; FilteredSampleNum = 897480</Note>
<Kse>756.0011397107872</Kse>
<Ksc>578.1852014605149</Ksc>
<Ksn>-1269.635543586671</Ksn>
<Kpe>12.937742653493165</Kpe>
<Kpc>20.98247082327636</Kpc>
<Kpn>-20.584080069799537</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-3-fine-0.1.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C-3-fine-0.1.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 97.18%; FilteredSampleNum = 815940</Note>
<Kse>780.3669554854422</Kse>
<Ksc>596.9316596203435</Ksc>
<Ksn>-1310.417015838393</Ksn>
<Kpe>12.391230831194346</Kpe>
<Kpc>20.907192079571796</Kpc>
<Kpn>-19.681727830259238</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-3-fine-0.3.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C-3-fine-0.3.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 97.28%; FilteredSampleNum = 634500</Note>
<Kse>763.3180746167471</Kse>
<Ksc>566.0043676932464</Ksc>
<Ksn>-1287.559686419554</Ksn>
<Kpe>11.883071961513604</Kpe>
<Kpc>21.802523813110582</Kpc>
<Kpn>-19.372653671987635</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-3-test-0.0001.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C-3-test-0.0001.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 94.76%; FilteredSampleNum = 1814757</Note>
<Kse>764.3643665468655</Kse>
<Ksc>583.164258920612</Ksc>
<Ksn>-1282.345636177419</Ksn>
<Kpe>13.756805454814529</Kpe>
<Kpc>22.056273893144933</Kpc>
<Kpn>-21.96725029340066</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-3-test-0.01.mp
+12
View File
@@ -0,0 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara3d>
<Name>S50C-3-test-0.01.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 95.59%; FilteredSampleNum = 1797444</Note>
<Kse>779.5872688486478</Kse>
<Ksc>596.28930993024</Ksc>
<Ksn>-1309.5868403168329</Ksn>
<Kpe>13.324542326012962</Kpe>
<Kpc>21.64485174584508</Kpc>
<Kpn>-21.192715147229002</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara3d>
Output/S50C-fine-0.05.mp
+10
View File
@@ -0,0 +1,10 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara2d>
<Name>S50C-fine-0.05.mp</Name>
<Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 60.40%; FilteredSampleNum = 861300</Note>
<Ksc>619.7559292263653</Ksc>
<Ksn>-1542.9923942107466</Ksn>
<Kpc>16.215754378180414</Kpc>
<Kpn>10.991111697078493</Kpn>
<AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara2d>
Output/S50C-fine-Copy-00.mp
-12
View File
@@ -1,12 +0,0 @@
<?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara>
<Name>S50C-fine.mp</Name>
<Note />
<Kse>781.9193047583416</Kse>
<Ksc>534.2515063930691</Ksc>
<Ksn>-1341.4299667097694</Ksn>
<Kpe>12.488024348568263</Kpe>
<Kpc>19.81313632613896</Kpc>
<Kpn>-20.852754261520523</Kpn>
<AnchorRakeAngle_deg>NaN</AnchorRakeAngle_deg>
</RakeFaceCuttingPara>
Output/S50C-fine.mp
+11 -11
View File
@@ -1,12 +1,12 @@
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="utf-8"?>
<RakeFaceCuttingPara> <RakeFaceCuttingPara3d>
<Name>S50C-fine.mp</Name> <Name>S50C-fine.mp</Name>
<Note /> <Note>SampleFlags = Fx, Fy, Fz; Correlation Coefficient R = 97.19%; FilteredSampleNum = 725220</Note>
<Kse>781.9193047583416</Kse> <Kse>767.4540541691283</Kse>
<Ksc>534.2515063930691</Ksc> <Ksc>577.5625378331987</Ksc>
<Ksn>-1341.4299667097694</Ksn> <Ksn>-1295.7562085248198</Ksn>
<Kpe>12.488024348568263</Kpe> <Kpe>12.105248061444964</Kpe>
<Kpc>19.81313632613896</Kpc> <Kpc>21.088662078505013</Kpc>
<Kpn>-20.852754261520523</Kpn> <Kpn>-19.446881671931408</Kpn>
<AnchorRakeAngle_deg>NaN</AnchorRakeAngle_deg> <AnchorRakeAngle_deg>8</AnchorRakeAngle_deg>
</RakeFaceCuttingPara> </RakeFaceCuttingPara3d>
S50C.hincproj
+272 -64
View File
@@ -1,13 +1,182 @@
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="utf-8"?>
<MillingCourse ApiVersion="3.1.315.0"> <MachiningProject ApiVersion="3.1.447.0">
<MillingEquipment> <MachiningEquipment>
<MachiningEquipment> <MachiningEquipment>
<SolidMachiningChain> <MachiningChain>
<XmlSource>EmptyMachine.mt</XmlSource> <XmlSource>EmptyMachine.mt</XmlSource>
</SolidMachiningChain> </MachiningChain>
<SpindleCapability> <SpindleCapability>
<XmlSource>SpindleCapability/test3.SpindleCapability</XmlSource> <XmlSource>SpindleCapability/test3.SpindleCapability</XmlSource>
</SpindleCapability> </SpindleCapability>
<MillingTool>
<Note>P-SE0604 (Speed Tiger)</Note>
<Holder>
<XmlSource>BT40-ER16-090.Holder</XmlSource>
</Holder>
<Cutter>
<MillingCutter>
<Name></Name>
<Note></Note>
<IntegralMode>SolidEnd</IntegralMode>
<ShaperProfile>
<AptProfile>
<Apt>
<ColumnApt>
<D>6</D>
<Rc>0</Rc>
<FluteH>16</FluteH>
</ColumnApt>
</Apt>
</AptProfile>
</ShaperProfile>
<InnerBeamProfile>
<FluteDependentRatioProfile>
<!--<ConstRatioProfile>
<RadiusRatio>0.6</RadiusRatio>
</ConstRatioProfile>-->
</FluteDependentRatioProfile>
</InnerBeamProfile>
<UpperBeamGeom>
<TransformationGeom>
<Transformer />
<Geom>
<Cylindroid>
<PairZr>(16,3)</PairZr>
<PairZr>(50,3)</PairZr>
</Cylindroid>
</Geom>
</TransformationGeom>
</UpperBeamGeom>
<LinearResolution_mm>0.015625</LinearResolution_mm>
<AngleResolution_deg>15</AngleResolution_deg>
<FluteContourTray>
<UniformContourTray>
<TrackNum>4</TrackNum>
<BaselineOneContour>
<FluteContour>
<SetupAngle_deg>0</SetupAngle_deg>
<BaseSideContour>
<ConstHelixSideContour>
<Helix_deg>35</Helix_deg>
<RadialRakeAngle_deg>8</RadialRakeAngle_deg>
<RadialReliefAngle_deg>5</RadialReliefAngle_deg>
</ConstHelixSideContour>
</BaseSideContour>
<BaseBottomContour />
</FluteContour>
</BaselineOneContour>
</UniformContourTray>
</FluteContourTray>
<FluteMaterial>
<CutterMaterial>
<Name>WC-Co6-800nm</Name>
<Note></Note>
<ElasticModulus_GPa>600</ElasticModulus_GPa>
<PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K>
<FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.44</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">17500</Entry>
<Entry Temperature_K="873.16">14800</Entry>
<Entry Temperature_K="1013.16">12500</Entry>
<Entry Temperature_K="1173.16">10000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">1.19</Entry>
<Entry Temperature_K="473.16">1.86</Entry>
<Entry Temperature_K="673.1600000000001">7.1</Entry>
<Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve>
</CutterMaterial>
</FluteMaterial>
<ShankMaterial>
<CutterMaterial>
<Name>WC-Co6-800nm</Name>
<Note></Note>
<ElasticModulus_GPa>600</ElasticModulus_GPa>
<PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K>
<FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.44</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">17500</Entry>
<Entry Temperature_K="873.16">14800</Entry>
<Entry Temperature_K="1013.16">12500</Entry>
<Entry Temperature_K="1173.16">10000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">1.19</Entry>
<Entry Temperature_K="473.16">1.86</Entry>
<Entry Temperature_K="673.1600000000001">7.1</Entry>
<Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve>
</CutterMaterial>
</ShankMaterial>
<CoatingLayerList>
<ThermalLayer1D>
<Material>
<CoatingMaterial>
<Name>TiAlN</Name>
<Note>Titanium Aluminum Nitride Coating</Note>
<ElasticModulus_GPa>500</ElasticModulus_GPa>
<PoissonRatio>0.25</PoissonRatio>
<TensileStrength_MPa>1350</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>7.5</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>25</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.55</HeatCapacity_JdgK>
<Density_gdcm3>4.2</Density_gdcm3>
<MeltingTemperature_K>3273</MeltingTemperature_K>
<FusionLatentHeat_Jdg>380</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.35</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">25000</Entry>
<Entry Temperature_K="873.16">21000</Entry>
<Entry Temperature_K="1073.16">17000</Entry>
<Entry Temperature_K="1273.16">13000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">0.9</Entry>
<Entry Temperature_K="473.16">1.3</Entry>
<Entry Temperature_K="673.16">4.8</Entry>
<Entry Temperature_K="873.16">18.5</Entry>
</TemperatureVsWearCoefficientCurve>
<PreferedThickness_um>3</PreferedThickness_um>
</CoatingMaterial>
</Material>
<Length_mm>0.003</Length_mm>
</ThermalLayer1D>
</CoatingLayerList>
<ShankMass_g MassAssignmentMode="EvaluateByVolume">16.806603351650548</ShankMass_g>
<HoneRadius_um>30</HoneRadius_um>
<ReliefAngle_deg>5</ReliefAngle_deg>
<MillingCutterOptLimit>
<MillingCutterOptOption>
<EnableOpt>true</EnableOpt>
<YieldingSafetyFactor>2</YieldingSafetyFactor>
<EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness>
<EnableLimitByReliefAngle>true</EnableLimitByReliefAngle>
<MinFeedPerTooth_mm>0</MinFeedPerTooth_mm>
<MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm>
</MillingCutterOptOption>
</MillingCutterOptLimit>
</MillingCutter>
</Cutter>
<ExposedCutterHeight_mm>21</ExposedCutterHeight_mm>
<ObservationAnchorReference>SpindleBuckleAnc</ObservationAnchorReference>
<RelativeHeightFromObservationAnchor_mm>-56.6</RelativeHeightFromObservationAnchor_mm>
<ObservationRingRadius_mm>44.5</ObservationRingRadius_mm>
</MillingTool>
<Fixture> <Fixture>
<Fixture> <Fixture>
<Solid> <Solid>
@@ -21,9 +190,12 @@
</Geom> </Geom>
</TransformationGeom> </TransformationGeom>
</Solid> </Solid>
<TableToWorkpieceTransformer> <GeomToTableTransformer>
<NoTransform />
</GeomToTableTransformer>
<GeomToWorkpieceTransformer>
<StaticTranslation Trans="(0, 0, 10)" /> <StaticTranslation Trans="(0, 0, 10)" />
</TableToWorkpieceTransformer> </GeomToWorkpieceTransformer>
</Fixture> </Fixture>
</Fixture> </Fixture>
<Workpiece> <Workpiece>
@@ -47,44 +219,37 @@
<StaticTranslation Trans="(45, 70, -30)" /> <StaticTranslation Trans="(45, 70, -30)" />
</WorkpieceGeomToFixtureBuckleTransformer> </WorkpieceGeomToFixtureBuckleTransformer>
<IdealGeom /> <IdealGeom />
<MillingPara> <CuttingPara>
<RakeFaceCuttingPara> <XmlSource>CuttingParameter/S50C.mp</XmlSource>
<Name>AA7075 (update on 20241219)</Name> </CuttingPara>
<Note>AA7075 (update on 20241219) exp on 2017</Note>
<Kse>347.79177234887237</Kse>
<Ksc>1605.0902189483</Ksc>
<Ksn>-1481.6923735052892</Ksn>
<Kpe>0.6751705314777301</Kpe>
<Kpc>0.9948729460349305</Kpc>
<Kpn>-0.7964217170018251</Kpn>
<AnchorRakeAngle_deg>NaN</AnchorRakeAngle_deg>
</RakeFaceCuttingPara>
</MillingPara>
<WorkpieceMaterial> <WorkpieceMaterial>
<XmlSource>WorkpieceMaterial/FC30.WorkpieceMaterial</XmlSource> <XmlSource>WorkpieceMaterial/S50C.WorkpieceMaterial</XmlSource>
</WorkpieceMaterial> </WorkpieceMaterial>
</Workpiece> </Workpiece>
</Workpiece> </Workpiece>
<TableToComp> <TableToComp>
<NoTransform /> <NoTransform />
</TableToComp> </TableToComp>
<BackgroundAndCoolantHeatCondition> <BackgroundTemperature_C>25</BackgroundTemperature_C>
<BackgroundTemperature_C>25</BackgroundTemperature_C> <CoolantHeatCondition>
<CoolantHeatTransferCoefficient_Wdm2K>1000</CoolantHeatTransferCoefficient_Wdm2K> <CoolantTemperature_C>25</CoolantTemperature_C>
</BackgroundAndCoolantHeatCondition> <CoolantConvectionCoefficient_Wdm2K>1000</CoolantConvectionCoefficient_Wdm2K>
</CoolantHeatCondition>
</MachiningEquipment> </MachiningEquipment>
</MillingEquipment> </MachiningEquipment>
<MillingToolHouse> <MachiningToolHouse>
<MachiningToolHouse> <MachiningToolHouse>
<Entry ID="1"> <Entry ID="1">
<StickMachiningTool> <MillingTool>
<Note>P-SE0604 (Speed Tiger)</Note> <Note>P-SE0604 (Speed Tiger)</Note>
<Holder> <Holder>
<XmlSource>BT40-ER16-090.Holder</XmlSource> <XmlSource>BT40-ER16-090.Holder</XmlSource>
</Holder> </Holder>
<Cutter> <Cutter>
<MillingCutter> <MillingCutter>
<MainIntegralMode>SolidEnd</MainIntegralMode> <Name></Name>
<Note></Note>
<IntegralMode>SolidEnd</IntegralMode>
<ShaperProfile> <ShaperProfile>
<AptProfile> <AptProfile>
<Apt> <Apt>
@@ -107,7 +272,7 @@
<TransformationGeom> <TransformationGeom>
<Transformer /> <Transformer />
<Geom> <Geom>
<Cylindroid LongitudeNum="12"> <Cylindroid>
<PairZr>(16,3)</PairZr> <PairZr>(16,3)</PairZr>
<PairZr>(50,3)</PairZr> <PairZr>(50,3)</PairZr>
</Cylindroid> </Cylindroid>
@@ -134,7 +299,7 @@
</BaselineOneContour> </BaselineOneContour>
</UniformContourTray> </UniformContourTray>
</FluteContourTray> </FluteContourTray>
<BodyMaterial> <FluteMaterial>
<CutterMaterial> <CutterMaterial>
<Name>WC-Co6-800nm</Name> <Name>WC-Co6-800nm</Name>
<Note></Note> <Note></Note>
@@ -142,7 +307,7 @@
<PoissonRatio>0</PoissonRatio> <PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa> <TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK> <ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatTransferCoefficient_WdmK>70</HeatTransferCoefficient_WdmK> <HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK> <HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3> <Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K> <MeltingTemperature_K>3143.16</MeltingTemperature_K>
@@ -161,7 +326,35 @@
<Entry Temperature_K="873.1600000000001">25.7</Entry> <Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve> </TemperatureVsWearCoefficientCurve>
</CutterMaterial> </CutterMaterial>
</BodyMaterial> </FluteMaterial>
<ShankMaterial>
<CutterMaterial>
<Name>WC-Co6-800nm</Name>
<Note></Note>
<ElasticModulus_GPa>600</ElasticModulus_GPa>
<PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K>
<FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.44</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">17500</Entry>
<Entry Temperature_K="873.16">14800</Entry>
<Entry Temperature_K="1013.16">12500</Entry>
<Entry Temperature_K="1173.16">10000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">1.19</Entry>
<Entry Temperature_K="473.16">1.86</Entry>
<Entry Temperature_K="673.1600000000001">7.1</Entry>
<Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve>
</CutterMaterial>
</ShankMaterial>
<CoatingLayerList> <CoatingLayerList>
<ThermalLayer1D> <ThermalLayer1D>
<Material> <Material>
@@ -172,7 +365,7 @@
<PoissonRatio>0.25</PoissonRatio> <PoissonRatio>0.25</PoissonRatio>
<TensileStrength_MPa>1350</TensileStrength_MPa> <TensileStrength_MPa>1350</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>7.5</ThermalExpansionCoefficient_dMK> <ThermalExpansionCoefficient_dMK>7.5</ThermalExpansionCoefficient_dMK>
<HeatTransferCoefficient_WdmK>25</HeatTransferCoefficient_WdmK> <HeatConductivity_WdmK>25</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.55</HeatCapacity_JdgK> <HeatCapacity_JdgK>0.55</HeatCapacity_JdgK>
<Density_gdcm3>4.2</Density_gdcm3> <Density_gdcm3>4.2</Density_gdcm3>
<MeltingTemperature_K>3273</MeltingTemperature_K> <MeltingTemperature_K>3273</MeltingTemperature_K>
@@ -196,33 +389,35 @@
<Length_mm>0.003</Length_mm> <Length_mm>0.003</Length_mm>
</ThermalLayer1D> </ThermalLayer1D>
</CoatingLayerList> </CoatingLayerList>
<CutterMass_g CutterMassAssignmentMode="EvaluateByVolume">16.806603351650548</CutterMass_g> <ShankMass_g MassAssignmentMode="EvaluateByVolume">16.806603351650548</ShankMass_g>
<HoneRadius_um>30</HoneRadius_um> <HoneRadius_um>30</HoneRadius_um>
<ReliefAngle_deg>5</ReliefAngle_deg> <ReliefAngle_deg>5</ReliefAngle_deg>
<MillingCutterOptLimit> <MillingCutterOptLimit>
<MillingCutterOptLimit> <MillingCutterOptOption>
<EnableOpt>true</EnableOpt> <EnableOpt>true</EnableOpt>
<YieldingSafetyFactor>2</YieldingSafetyFactor> <YieldingSafetyFactor>2</YieldingSafetyFactor>
<EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness> <EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness>
<EnableLimitByReliefAngle>true</EnableLimitByReliefAngle>
<MinFeedPerTooth_mm>0</MinFeedPerTooth_mm> <MinFeedPerTooth_mm>0</MinFeedPerTooth_mm>
<MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm> <MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm>
</MillingCutterOptLimit> </MillingCutterOptOption>
</MillingCutterOptLimit> </MillingCutterOptLimit>
</MillingCutter> </MillingCutter>
</Cutter> </Cutter>
<PreservedDistanceBetweenFluteAndSpindleNose_mm>5</PreservedDistanceBetweenFluteAndSpindleNose_mm> <ExposedCutterHeight_mm>21</ExposedCutterHeight_mm>
<ObservationAnchorReference>SpindleBuckleAnc</ObservationAnchorReference> <ObservationAnchorReference>SpindleBuckleAnc</ObservationAnchorReference>
<RelativeHeightFromObservationAnchor_mm>-56.6</RelativeHeightFromObservationAnchor_mm> <RelativeHeightFromObservationAnchor_mm>-56.6</RelativeHeightFromObservationAnchor_mm>
<ObservationRingRadius_mm>44.5</ObservationRingRadius_mm> <ObservationRingRadius_mm>44.5</ObservationRingRadius_mm>
</StickMachiningTool> </MillingTool>
</Entry> </Entry>
</MachiningToolHouse> </MachiningToolHouse>
</MillingToolHouse> </MachiningToolHouse>
<NcEnv> <NcEnv>
<NcEnv> <NcEnv>
<CncBrand>Fanuc</CncBrand> <CncBrand>Fanuc</CncBrand>
<HomeMc>(0, 0, 0)</HomeMc> <HomeMc>(0, 0, 0)</HomeMc>
<ToolingMc /> <ToolingMcXyz>(0, 0, 0)</ToolingMcXyz>
<ToolingMcAbc_deg>(0, 0, 0)</ToolingMcAbc_deg>
<IsIdealOffsetDependentOnToolHouse>true</IsIdealOffsetDependentOnToolHouse> <IsIdealOffsetDependentOnToolHouse>true</IsIdealOffsetDependentOnToolHouse>
<MillingToolOffsetTable> <MillingToolOffsetTable>
<Entry ID="1"> <Entry ID="1">
@@ -237,18 +432,18 @@
<SetToolHeightCompensationOnFeatureNormal>false</SetToolHeightCompensationOnFeatureNormal> <SetToolHeightCompensationOnFeatureNormal>false</SetToolHeightCompensationOnFeatureNormal>
<EnableShortestRotary>true</EnableShortestRotary> <EnableShortestRotary>true</EnableShortestRotary>
<EnableArcCornerRadiusCompensation>false</EnableArcCornerRadiusCompensation> <EnableArcCornerRadiusCompensation>false</EnableArcCornerRadiusCompensation>
<StrokeLimitXYZ_mm> <StrokeLimitXyz_mm>
<Box3d> <Box3d>
<Min>(INF, INF, INF)</Min> <Min>(-INF, -INF, -INF)</Min>
<Max>(-INF, -INF, -INF)</Max> <Max>(INF, INF, INF)</Max>
</Box3d> </Box3d>
</StrokeLimitXYZ_mm> </StrokeLimitXyz_mm>
<StrokeLimitABC_deg> <StrokeLimitAbc_deg>
<Box3d> <Box3d>
<Min>(INF, INF, INF)</Min> <Min>(-INF, -INF, -INF)</Min>
<Max>(-INF, -INF, -INF)</Max> <Max>(INF, INF, INF)</Max>
</Box3d> </Box3d>
</StrokeLimitABC_deg> </StrokeLimitAbc_deg>
<MaxRotarySpeedABC_rpm>(60, 60, 60)</MaxRotarySpeedABC_rpm> <MaxRotarySpeedABC_rpm>(60, 60, 60)</MaxRotarySpeedABC_rpm>
<MaxSpindleSpeed_rpm>60000</MaxSpindleSpeed_rpm> <MaxSpindleSpeed_rpm>60000</MaxSpindleSpeed_rpm>
<RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin> <RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
@@ -276,22 +471,36 @@
</IsoCoordinateTable> </IsoCoordinateTable>
</NcEnv> </NcEnv>
</NcEnv> </NcEnv>
<RootListCommand> <CsvRunnerConfig>
<CsvRunnerConfig>
<LineBeginCsScriptTag>LineBeginCsScript</LineBeginCsScriptTag>
<LineEndCsScriptTag>LineEndCsScript</LineEndCsScriptTag>
<MachineCoordinatePrefixTag>MC.</MachineCoordinatePrefixTag>
<CutterLocationPrefixTag>CL.</CutterLocationPrefixTag>
<ToolIdTag>ToolId</ToolIdTag>
<SpindleSpeedTag_rpm>SpindleSpeed_rpm</SpindleSpeedTag_rpm>
<SpindleDirectionTag>Spd.Dir.</SpindleDirectionTag>
<FeedrateTag_mmdmin>Feedrate_mmdmin</FeedrateTag_mmdmin>
<DurationTag>StepDuration</DurationTag>
<ActualTimeTag>ActualTime</ActualTimeTag>
</CsvRunnerConfig>
</CsvRunnerConfig>
<PlayerCommand>
<ListCommand> <ListCommand>
<CommandEntryList> <CommandEntryList>
<CommandEntry IsEnabled="true"> <EnablingWrapper>
<IsEnabled>true</IsEnabled>
<Command> <Command>
<ScriptCommand> <ScriptCommand>
<ScriptTitle>train</ScriptTitle> <ScriptTitle>train</ScriptTitle>
<ScriptText>////一般設定//// <ScriptText>////一般設定////
MillingForceCycleDivisionNum=180; MillingForceCycleDivisionNum=360;
MachiningResolution=0.125/8; MachiningResolution=0.125/8;
DispCache_Mb = 860; //GRAM暫存空間 (Mb)
MachiningMotionResolution = FeedPerTooth; MachiningMotionResolution = FeedPerTooth;
EnableCollisionDetection = false; //是否啟用碰撞檢測開啟 EnableCollisionDetection = false; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停 EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
EnableMillingForceEvaluation=true;
DefaultParaTemplateDimension=3;
ClearTimeMappingData(); ClearTimeMappingData();
string dynamometerFile=$"./Managed/dynamometer-S50C/Exp09/Exp09.csv"; string dynamometerFile=$"./Managed/dynamometer-S50C/Exp09/Exp09.csv";
@@ -305,18 +514,18 @@ AddTimeDataByFile("high3",dynamometerFile,66.8694,67.2146);
//WriteRuntimeGeom("Cache/raw.wct"); //寫入暫存檔 //WriteRuntimeGeom("Cache/raw.wct"); //寫入暫存檔
//ReadRuntimeGeom("Cache/raw.wct"); //讀取暫存檔 //ReadRuntimeGeom("Cache/raw.wct"); //讀取暫存檔
RunNcFile("NC/lines.nc"); PlayNcFile("NC/lines.nc");
TrainMillingPara(Fx|Fy|Fz, "Output/S50C-fine.mp",0.2); var outlierRatio=0.1;
TrainMillingPara(Fx|Fy|Fz, $"Output/S50C-{DefaultParaTemplateDimension}-fine-{outlierRatio}.mp",outlierRatio);
</ScriptText> </ScriptText>
<IsSimpleMode>true</IsSimpleMode>
</ScriptCommand> </ScriptCommand>
</Command> </Command>
</CommandEntry> </EnablingWrapper>
</CommandEntryList> </CommandEntryList>
</ListCommand> </ListCommand>
</RootListCommand> </PlayerCommand>
<TimeMapping> <TimeMapping>
<TimeMapping> <TimeMapping>
<Entrys> <Entrys>
@@ -366,15 +575,15 @@ TrainMillingPara(Fx|Fy|Fz, "Output/S50C-fine.mp",0.2);
</TimeMapping> </TimeMapping>
</TimeMapping> </TimeMapping>
<EnableCollisionDetection>false</EnableCollisionDetection> <EnableCollisionDetection>false</EnableCollisionDetection>
<EnablePauseOnCollision>false</EnablePauseOnCollision> <EnablePauseOnFailure>false</EnablePauseOnFailure>
<EnableStrokeLimitCheck>true</EnableStrokeLimitCheck>
<MillingActRunnerConfig> <MillingActRunnerConfig>
<MillingActRunnerConfig> <MillingActRunnerConfig>
<EnableAdvancedPhysics>true</EnableAdvancedPhysics>
<EnableExternalEvaluation>true</EnableExternalEvaluation>
<EnableDeflectionTransformation>false</EnableDeflectionTransformation> <EnableDeflectionTransformation>false</EnableDeflectionTransformation>
<MachiningMotionResolution> <MachiningMotionResolution>
<FeedPerCycleMachiningMotionResolution /> <FeedPerToothMachiningMotionResolution />
</MachiningMotionResolution> </MachiningMotionResolution>
<InitSpindleTemperature_C>35</InitSpindleTemperature_C>
</MillingActRunnerConfig> </MillingActRunnerConfig>
</MillingActRunnerConfig> </MillingActRunnerConfig>
<InspectingKey>TrainingErrRatio</InspectingKey> <InspectingKey>TrainingErrRatio</InspectingKey>
@@ -617,5 +826,4 @@ TrainMillingPara(Fx|Fy|Fz, "Output/S50C-fine.mp",0.2);
</MillingGuide> </MillingGuide>
</MillingGuide> </MillingGuide>
<NcOptProc /> <NcOptProc />
<DispCacheMb>860</DispCacheMb> </MachiningProject>
</MillingCourse>
SpindleCapability/test3.SpindleCapability
+10 -8
View File
@@ -4,8 +4,10 @@
<Note></Note> <Note></Note>
<EnergyEfficiency>0.4</EnergyEfficiency> <EnergyEfficiency>0.4</EnergyEfficiency>
<GearShiftSpindleSpeed_rpm>4000.0000000000005</GearShiftSpindleSpeed_rpm> <GearShiftSpindleSpeed_rpm>4000.0000000000005</GearShiftSpindleSpeed_rpm>
<SpindleSpeedToPowerContours> <DryRunFrictionPowerCoefficient_mWdrpm>4.82</DryRunFrictionPowerCoefficient_mWdrpm>
<Contour InsistentRatio="0.2"> <DryRunWindagePowerCoefficient_pWdrpm3>90</DryRunWindagePowerCoefficient_pWdrpm3>
<WorkableDurationToSpindleSpeedPowerContoursDictionary>
<Contour WorkableDuration-min="120">
<SpindleSpeedToPower> <SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM> <SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW> <Power-kW>0</Power-kW>
@@ -23,7 +25,7 @@
<Power-kW>2.5</Power-kW> <Power-kW>2.5</Power-kW>
</SpindleSpeedToPower> </SpindleSpeedToPower>
</Contour> </Contour>
<Contour InsistentRatio="0.8"> <Contour WorkableDuration-min="480">
<SpindleSpeedToPower> <SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM> <SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW> <Power-kW>0</Power-kW>
@@ -41,7 +43,7 @@
<Power-kW>5</Power-kW> <Power-kW>5</Power-kW>
</SpindleSpeedToPower> </SpindleSpeedToPower>
</Contour> </Contour>
<Contour InsistentRatio="1"> <Contour WorkableDuration-min="INF">
<SpindleSpeedToPower> <SpindleSpeedToPower>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM> <SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Power-kW>0</Power-kW> <Power-kW>0</Power-kW>
@@ -59,9 +61,9 @@
<Power-kW>3</Power-kW> <Power-kW>3</Power-kW>
</SpindleSpeedToPower> </SpindleSpeedToPower>
</Contour> </Contour>
</SpindleSpeedToPowerContours> </WorkableDurationToSpindleSpeedPowerContoursDictionary>
<SpindleSpeedToTorqueContours> <WorkableDurationToSpindleSpeedTorqueContoursDictionary>
<Contour InsistentRatio="1"> <Contour WorkableDuration-min="INF">
<SpindleSpeedToTorque> <SpindleSpeedToTorque>
<SpindleSpeed-RPM>0</SpindleSpeed-RPM> <SpindleSpeed-RPM>0</SpindleSpeed-RPM>
<Torque-Nm>50</Torque-Nm> <Torque-Nm>50</Torque-Nm>
@@ -91,5 +93,5 @@
<Torque-Nm>5</Torque-Nm> <Torque-Nm>5</Torque-Nm>
</SpindleSpeedToTorque> </SpindleSpeedToTorque>
</Contour> </Contour>
</SpindleSpeedToTorqueContours> </WorkableDurationToSpindleSpeedTorqueContoursDictionary>
</SpindleCapability> </SpindleCapability>
WorkpieceMaterial/FC30.WorkpieceMaterial
+1 -1
View File
@@ -8,7 +8,7 @@
<TensileYieldStrength_MPa>200</TensileYieldStrength_MPa> <TensileYieldStrength_MPa>200</TensileYieldStrength_MPa>
<ElogationRaioAtBreak>0.01</ElogationRaioAtBreak> <ElogationRaioAtBreak>0.01</ElogationRaioAtBreak>
<HeatCapacity_JdgK>0.46</HeatCapacity_JdgK> <HeatCapacity_JdgK>0.46</HeatCapacity_JdgK>
<HeatTransferCoefficient_WdmK>52</HeatTransferCoefficient_WdmK> <HeatConductivity_WdmK>52</HeatConductivity_WdmK>
<Density_gdcm3>7.2</Density_gdcm3> <Density_gdcm3>7.2</Density_gdcm3>
<FusionLatentHeat_Jdg>220</FusionLatentHeat_Jdg> <FusionLatentHeat_Jdg>220</FusionLatentHeat_Jdg>
<MeltingTemperature_C>1150</MeltingTemperature_C> <MeltingTemperature_C>1150</MeltingTemperature_C>
WorkpieceMaterial/S50C.WorkpieceMaterial
+15
View File
@@ -0,0 +1,15 @@
<?xml version="1.0" encoding="utf-8"?>
<WorkpieceMaterial>
<Name>S50C</Name>
<Note></Note>
<ElasticModulus_GPa>205</ElasticModulus_GPa>
<PoissonRatio>0.28</PoissonRatio>
<CompressiveYieldStrength_MPa>580</CompressiveYieldStrength_MPa>
<TensileYieldStrength_MPa>540</TensileYieldStrength_MPa>
<ElogationRaioAtBreak>0.16</ElogationRaioAtBreak>
<HeatCapacity_JdgK>0.49</HeatCapacity_JdgK>
<HeatConductivity_WdmK>50</HeatConductivity_WdmK>
<Density_gdcm3>7.85</Density_gdcm3>
<FusionLatentHeat_Jdg>270</FusionLatentHeat_Jdg>
<MeltingTemperature_C>1495</MeltingTemperature_C>
</WorkpieceMaterial>
test-err-ratio.hincproj
+661
View File
@@ -0,0 +1,661 @@
<?xml version="1.0" encoding="utf-8"?>
<MachiningProject ApiVersion="3.1.465.0">
<MachiningEquipment>
<MachiningEquipment>
<MachiningChain>
<XmlSource>EmptyMachine.mt</XmlSource>
</MachiningChain>
<SpindleCapability>
<XmlSource>SpindleCapability/test3.SpindleCapability</XmlSource>
</SpindleCapability>
<Fixture>
<Fixture>
<Solid>
<TransformationGeom>
<Transformer />
<Geom>
<Box3d>
<Min>(-45, -70, 0)</Min>
<Max>(45, 70, 10)</Max>
</Box3d>
</Geom>
</TransformationGeom>
</Solid>
<GeomToTableTransformer>
<NoTransform />
</GeomToTableTransformer>
<GeomToWorkpieceTransformer>
<StaticTranslation Trans="(0, 0, 10)" />
</GeomToWorkpieceTransformer>
</Fixture>
</Fixture>
<Workpiece>
<Workpiece>
<InitResolution>0.125</InitResolution>
<InitGeom>
<TransformationGeom>
<Transformer />
<Geom>
<Box3d>
<Min>(0, 0, -30)</Min>
<Max>(90, 140, 0)</Max>
</Box3d>
</Geom>
</TransformationGeom>
</InitGeom>
<WorkpieceGeomToProgramZeroTransformer>
<StaticTranslation Trans="(-0, -0, -0)" />
</WorkpieceGeomToProgramZeroTransformer>
<WorkpieceGeomToFixtureBuckleTransformer>
<StaticTranslation Trans="(45, 70, -30)" />
</WorkpieceGeomToFixtureBuckleTransformer>
<IdealGeom />
<CuttingPara>
<XmlSource>CuttingParameter/S50C.mp</XmlSource>
</CuttingPara>
<WorkpieceMaterial>
<XmlSource>WorkpieceMaterial/S50C.WorkpieceMaterial</XmlSource>
</WorkpieceMaterial>
</Workpiece>
</Workpiece>
<TableToComp>
<NoTransform />
</TableToComp>
<BackgroundTemperature_C>25</BackgroundTemperature_C>
<CoolantHeatCondition>
<CoolantTemperature_C>25</CoolantTemperature_C>
<CoolantConvectionCoefficient_Wdm2K>1000</CoolantConvectionCoefficient_Wdm2K>
</CoolantHeatCondition>
</MachiningEquipment>
</MachiningEquipment>
<MachiningToolHouse>
<MachiningToolHouse>
<Entry ID="1">
<MillingTool>
<Note>P-SE0604 (Speed Tiger)</Note>
<Holder>
<XmlSource>BT40-ER16-090.Holder</XmlSource>
</Holder>
<Cutter>
<MillingCutter>
<Name></Name>
<Note></Note>
<IntegralMode>SolidEnd</IntegralMode>
<ShaperProfile>
<AptProfile>
<Apt>
<ColumnApt>
<D>6</D>
<Rc>0</Rc>
<FluteH>16</FluteH>
</ColumnApt>
</Apt>
</AptProfile>
</ShaperProfile>
<InnerBeamProfile>
<FluteDependentRatioProfile>
<!--<ConstRatioProfile>
<RadiusRatio>0.6</RadiusRatio>
</ConstRatioProfile>-->
</FluteDependentRatioProfile>
</InnerBeamProfile>
<UpperBeamGeom>
<TransformationGeom>
<Transformer />
<Geom>
<Cylindroid>
<PairZr>(16,3)</PairZr>
<PairZr>(50,3)</PairZr>
</Cylindroid>
</Geom>
</TransformationGeom>
</UpperBeamGeom>
<LinearResolution_mm>0.015625</LinearResolution_mm>
<AngleResolution_deg>15</AngleResolution_deg>
<FluteContourTray>
<UniformContourTray>
<TrackNum>4</TrackNum>
<BaselineOneContour>
<FluteContour>
<SetupAngle_deg>0</SetupAngle_deg>
<BaseSideContour>
<ConstHelixSideContour>
<Helix_deg>35</Helix_deg>
<RadialRakeAngle_deg>8</RadialRakeAngle_deg>
<RadialReliefAngle_deg>5</RadialReliefAngle_deg>
</ConstHelixSideContour>
</BaseSideContour>
<BaseBottomContour />
</FluteContour>
</BaselineOneContour>
</UniformContourTray>
</FluteContourTray>
<FluteMaterial>
<CutterMaterial>
<Name>WC-Co6-800nm</Name>
<Note></Note>
<ElasticModulus_GPa>600</ElasticModulus_GPa>
<PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K>
<FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.44</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">17500</Entry>
<Entry Temperature_K="873.16">14800</Entry>
<Entry Temperature_K="1013.16">12500</Entry>
<Entry Temperature_K="1173.16">10000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">1.19</Entry>
<Entry Temperature_K="473.16">1.86</Entry>
<Entry Temperature_K="673.1600000000001">7.1</Entry>
<Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve>
</CutterMaterial>
</FluteMaterial>
<ShankMaterial>
<CutterMaterial>
<Name>WC-Co6-800nm</Name>
<Note></Note>
<ElasticModulus_GPa>600</ElasticModulus_GPa>
<PoissonRatio>0</PoissonRatio>
<TensileStrength_MPa>1440</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>6.7</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>70</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.34</HeatCapacity_JdgK>
<Density_gdcm3>14.95</Density_gdcm3>
<MeltingTemperature_K>3143.16</MeltingTemperature_K>
<FusionLatentHeat_Jdg>400</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.44</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">17500</Entry>
<Entry Temperature_K="873.16">14800</Entry>
<Entry Temperature_K="1013.16">12500</Entry>
<Entry Temperature_K="1173.16">10000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">1.19</Entry>
<Entry Temperature_K="473.16">1.86</Entry>
<Entry Temperature_K="673.1600000000001">7.1</Entry>
<Entry Temperature_K="873.1600000000001">25.7</Entry>
</TemperatureVsWearCoefficientCurve>
</CutterMaterial>
</ShankMaterial>
<CoatingLayerList>
<ThermalLayer1D>
<Material>
<CoatingMaterial>
<Name>TiAlN</Name>
<Note>Titanium Aluminum Nitride Coating</Note>
<ElasticModulus_GPa>500</ElasticModulus_GPa>
<PoissonRatio>0.25</PoissonRatio>
<TensileStrength_MPa>1350</TensileStrength_MPa>
<ThermalExpansionCoefficient_dMK>7.5</ThermalExpansionCoefficient_dMK>
<HeatConductivity_WdmK>25</HeatConductivity_WdmK>
<HeatCapacity_JdgK>0.55</HeatCapacity_JdgK>
<Density_gdcm3>4.2</Density_gdcm3>
<MeltingTemperature_K>3273</MeltingTemperature_K>
<FusionLatentHeat_Jdg>380</FusionLatentHeat_Jdg>
<FrictionCoefficient>0.35</FrictionCoefficient>
<TemperatureVsHardnessCurve>
<Entry Temperature_K="298.16">25000</Entry>
<Entry Temperature_K="873.16">21000</Entry>
<Entry Temperature_K="1073.16">17000</Entry>
<Entry Temperature_K="1273.16">13000</Entry>
</TemperatureVsHardnessCurve>
<TemperatureVsWearCoefficientCurve>
<Entry Temperature_K="298.16">0.9</Entry>
<Entry Temperature_K="473.16">1.3</Entry>
<Entry Temperature_K="673.16">4.8</Entry>
<Entry Temperature_K="873.16">18.5</Entry>
</TemperatureVsWearCoefficientCurve>
<PreferedThickness_um>3</PreferedThickness_um>
</CoatingMaterial>
</Material>
<Length_mm>0.003</Length_mm>
</ThermalLayer1D>
</CoatingLayerList>
<ShankMass_g MassAssignmentMode="EvaluateByVolume">16.806603351650548</ShankMass_g>
<HoneRadius_um>30</HoneRadius_um>
<ReliefAngle_deg>5</ReliefAngle_deg>
<MillingCutterOptLimit>
<MillingCutterOptOption>
<EnableOpt>true</EnableOpt>
<YieldingSafetyFactor>2</YieldingSafetyFactor>
<EnableLimitByMinimumUncutChipThickness>true</EnableLimitByMinimumUncutChipThickness>
<EnableLimitByReliefAngle>true</EnableLimitByReliefAngle>
<MinFeedPerTooth_mm>0</MinFeedPerTooth_mm>
<MaxFeedPerTooth_mm>999</MaxFeedPerTooth_mm>
</MillingCutterOptOption>
</MillingCutterOptLimit>
</MillingCutter>
</Cutter>
<ExposedCutterHeight_mm>21</ExposedCutterHeight_mm>
<ObservationAnchorReference>SpindleBuckleAnc</ObservationAnchorReference>
<RelativeHeightFromObservationAnchor_mm>-56.6</RelativeHeightFromObservationAnchor_mm>
<ObservationRingRadius_mm>44.5</ObservationRingRadius_mm>
</MillingTool>
</Entry>
</MachiningToolHouse>
</MachiningToolHouse>
<NcEnv>
<NcEnv>
<CncBrand>Fanuc</CncBrand>
<HomeMc>(0, 0, 0)</HomeMc>
<ToolingMcXyz>(0, 0, 0)</ToolingMcXyz>
<ToolingMcAbc_deg>(0, 0, 0)</ToolingMcAbc_deg>
<IsIdealOffsetDependentOnToolHouse>true</IsIdealOffsetDependentOnToolHouse>
<MillingToolOffsetTable>
<Entry ID="1">
<MillingToolOffsetTableRow>
<IdealRadius_mm>3</IdealRadius_mm>
<RadialWear_mm>0</RadialWear_mm>
<IdealHeight_mm>157.44</IdealHeight_mm>
<AxialWear_mm>0</AxialWear_mm>
</MillingToolOffsetTableRow>
</Entry>
</MillingToolOffsetTable>
<SetToolHeightCompensationOnFeatureNormal>false</SetToolHeightCompensationOnFeatureNormal>
<EnableShortestRotary>true</EnableShortestRotary>
<EnableArcCornerRadiusCompensation>false</EnableArcCornerRadiusCompensation>
<StrokeLimitXyz_mm>
<Box3d>
<Min>(-INF, -INF, -INF)</Min>
<Max>(INF, INF, INF)</Max>
</Box3d>
</StrokeLimitXyz_mm>
<StrokeLimitAbc_deg>
<Box3d>
<Min>(-INF, -INF, -INF)</Min>
<Max>(INF, INF, INF)</Max>
</Box3d>
</StrokeLimitAbc_deg>
<MaxRotarySpeedABC_rpm>(60, 60, 60)</MaxRotarySpeedABC_rpm>
<MaxSpindleSpeed_rpm>60000</MaxSpindleSpeed_rpm>
<RapidFeedrate_mmdmin>20000</RapidFeedrate_mmdmin>
<ToolingTime>PT0S</ToolingTime>
<ConfigurationTable>
<Entry Key="1401#1">0</Entry>
</ConfigurationTable>
<IsoCoordinateTable>
<!--The ID is G code flag multiplying 1000. For example, ID of G54 is 54000.-->
<Entry ID="54000" Offset="(-45, -70, -635)" />
<Entry ID="55000" Offset="(0, 0, 0)" />
<Entry ID="56000" Offset="(0, 0, 0)" />
<Entry ID="57000" Offset="(0, 0, 0)" />
<Entry ID="58000" Offset="(0, 0, 0)" />
<Entry ID="59000" Offset="(0, 0, 0)" />
<Entry ID="59100" Offset="(0, 0, 0)" />
<Entry ID="59200" Offset="(0, 0, 0)" />
<Entry ID="59300" Offset="(0, 0, 0)" />
<Entry ID="59400" Offset="(0, 0, 0)" />
<Entry ID="59500" Offset="(0, 0, 0)" />
<Entry ID="59600" Offset="(0, 0, 0)" />
<Entry ID="59700" Offset="(0, 0, 0)" />
<Entry ID="59800" Offset="(0, 0, 0)" />
<Entry ID="59900" Offset="(0, 0, 0)" />
</IsoCoordinateTable>
</NcEnv>
</NcEnv>
<CsvRunnerConfig>
<CsvRunnerConfig>
<LineBeginCsScriptTag>LineBeginCsScript</LineBeginCsScriptTag>
<LineEndCsScriptTag>LineEndCsScript</LineEndCsScriptTag>
<MachineCoordinatePrefix>MC.</MachineCoordinatePrefix>
<CutterLocationPrefix>CL.</CutterLocationPrefix>
<ToolIdTag>ToolId</ToolIdTag>
<SpindleSpeedTag_rpm>SpindleSpeed_rpm</SpindleSpeedTag_rpm>
<SpindleDirectionTag>Spd.Dir.</SpindleDirectionTag>
<FeedrateTag_mmdmin>Feedrate_mmdmin</FeedrateTag_mmdmin>
<DurationTag>StepDuration</DurationTag>
<ActualTimeTag>ActualTime</ActualTimeTag>
</CsvRunnerConfig>
</CsvRunnerConfig>
<PlayerCommand>
<ListCommand>
<CommandEntryList>
<EnablingWrapper>
<IsEnabled>true</IsEnabled>
<Command>
<ScriptCommand>
<ScriptTitle>train</ScriptTitle>
<ScriptText>////一般設定////
MillingForceCycleDivisionNum=360;
MachiningResolution=0.125/8;
MachiningMotionResolution = FeedPerTooth;
EnableCollisionDetection = false; //是否啟用碰撞檢測開啟
EnablePauseOnCollision = false; //是否啟用碰撞發生時暫停
DefaultParaTemplateDimension=3;
ClearTimeMappingData();
string dynamometerFile=$"./Managed/dynamometer-S50C/Exp09/Exp09.csv";
AddTimeDataByFile("low1",dynamometerFile,16.4726,21.6107);
AddTimeDataByFile("low2",dynamometerFile,39.5988,42.2784);
AddTimeDataByFile("low3",dynamometerFile,51.9493,53.7441);
AddTimeDataByFile("high1",dynamometerFile,60.0392,60.9723);
AddTimeDataByFile("high2",dynamometerFile,64.3404,64.8226);
AddTimeDataByFile("high3",dynamometerFile,66.8694,67.2146);
//WriteRuntimeGeom("Cache/raw.wct"); //寫入暫存檔
//ReadRuntimeGeom("Cache/raw.wct"); //讀取暫存檔
PlayNcFile("NC/lines.nc");
var outlierRatio=0.01;
TrainMillingPara(Fx|Fy|Fz, $"Output/S50C-{DefaultParaTemplateDimension}-test-{outlierRatio}.mp",outlierRatio);
</ScriptText>
</ScriptCommand>
</Command>
</EnablingWrapper>
</CommandEntryList>
</ListCommand>
</PlayerCommand>
<TimeMapping>
<TimeMapping>
<Entrys>
<Entry Key="low1">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:00:16.4726000</BeginTime>
<EndTime>00:00:21.6107000</EndTime>
</FileTimeSection>
</Entry>
<Entry Key="low2">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:00:39.5988000</BeginTime>
<EndTime>00:00:42.2784000</EndTime>
</FileTimeSection>
</Entry>
<Entry Key="low3">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:00:51.9493000</BeginTime>
<EndTime>00:00:53.7441000</EndTime>
</FileTimeSection>
</Entry>
<Entry Key="high1">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:01:00.0392000</BeginTime>
<EndTime>00:01:00.9723000</EndTime>
</FileTimeSection>
</Entry>
<Entry Key="high2">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:01:04.3404000</BeginTime>
<EndTime>00:01:04.8226000</EndTime>
</FileTimeSection>
</Entry>
<Entry Key="high3">
<FileTimeSection>
<File>./Managed/dynamometer-S50C/Exp09/Exp09.csv</File>
<BeginTime>00:01:06.8694000</BeginTime>
<EndTime>00:01:07.2146000</EndTime>
</FileTimeSection>
</Entry>
</Entrys>
</TimeMapping>
</TimeMapping>
<MachiningActRunnerConfig>
<MachiningActRunnerConfig>
<EnableStrokeLimitCheck>true</EnableStrokeLimitCheck>
<EnableCollisionDetection>false</EnableCollisionDetection>
<EnablePauseOnFailure>false</EnablePauseOnFailure>
<EnablePhysics>true</EnablePhysics>
<EnableWearEffect>false</EnableWearEffect>
<EnableDeflectionTransformation>false</EnableDeflectionTransformation>
<MachiningMotionResolution>
<FeedPerToothMachiningMotionResolution />
</MachiningMotionResolution>
<InitSpindleTemperature_C>35</InitSpindleTemperature_C>
</MachiningActRunnerConfig>
</MachiningActRunnerConfig>
<InspectingKey>TrainingErrRatio</InspectingKey>
<MillingGuide>
<MillingGuide>
<DictionaryColorGuide>
<DictionaryColorGuide>
<SelectedKey>TrainingErrRatio</SelectedKey>
<KeyToColorGuide>
<Entry Key="Feedrate_mmdmin">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="AvgAbsTorque_Nm">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="TrainingErrRatio">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="ToothArcDuration_s">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="WorkpieceDermisTemperature_C">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="ThermalCrackRatio">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="MC.B">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="FeedPerCycle_mm">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>2</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
<Entry Key="ProgramSideCusp_um">
<FuncRangeColorGuide>
<RangeColorRule>
<!--Available options: NormalizedPositiveErf, NormalizedErf, Linear-->
<RatioRgbFuncEnum>Linear</RatioRgbFuncEnum>
<Floor>0</Floor>
<Ceiling>1</Ceiling>
</RangeColorRule>
</FuncRangeColorGuide>
</Entry>
</KeyToColorGuide>
</DictionaryColorGuide>
</DictionaryColorGuide>
<ForceWCycleLineDivConfig>
<ForceCycleLineDivConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-400</Min>
<Max>400</Max>
</VRange>
<MainForceCycleFlag>ForceToToolOnToolRunningCoordinate</MainForceCycleFlag>
</ForceCycleLineDivConfig>
</ForceWCycleLineDivConfig>
<SimSpindleMomentCycleLineDivConfig>
<SpindleMomentCycleLineDivConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-10</Min>
<Max>10</Max>
</VRange>
</TimeChartYConfig>
</SpindleMomentCycleLineDivConfig>
</SimSpindleMomentCycleLineDivConfig>
<SensorSpindleMomentCycleLineDivConfig>
<SpindleMomentCycleLineDivConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>-10</Min>
<Max>10</Max>
</VRange>
</TimeChartYConfig>
</SpindleMomentCycleLineDivConfig>
</SensorSpindleMomentCycleLineDivConfig>
<ClStripChartConfig>
<ClStripChartConfig>
<ItemConfigDictionary>
<Entry Key="Feedrate_mmdmin">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="AvgAbsTorque_Nm">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="TrainingErrRatio">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="ToothArcDuration_s">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="WorkpieceDermisTemperature_C">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="ThermalCrackRatio">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="MC.B">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="FeedPerCycle_mm">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
<Entry Key="ProgramSideCusp_um">
<ClStripChartItemConfig>
<TimeChartYConfig>
<VRangeMode>Fit</VRangeMode>
<VRange>
<Min>0</Min>
<Max>1</Max>
</VRange>
</TimeChartYConfig>
</ClStripChartItemConfig>
</Entry>
</ItemConfigDictionary>
</ClStripChartConfig>
</ClStripChartConfig>
</MillingGuide>
</MillingGuide>
</MachiningProject>